Cisco Ipsec Vpn Windows 10

 admin



Right click the connection (here VPDN) and click Properties. Verify the IP address of the Aggregator (here 192.168.1.1) Step 10. Navigate to OptionsPPP Settings and verify the settings, as shown in this image. Setting up the Windows 10 machine. On the Windows 10 machine, open Network and Internet Settings. Choose VPN from the left panel and add a VPN connection. Edit the advanced options. Place the IP address of your VPN server under server name or address. Choose the L2TP/IPSEC with pre-shared key option under VPN type. Add in the pre-shared key.

Objective

  1. If you searching to evaluate Cisco Ipsec Vpn On Windows 10 price. Cisco Ipsec Vpn On Windows 10 BY Cisco Ipsec Vpn On Windows 10 in Articles If you searching to evaluate Cisco Ipsec Vpn On Windows 10.
  2. Oct 31, 2013 We have a variety of machines out there running OS X 10.7 (Lion) and 10.8 (Mountain Lion), and the built-in “Cisco IPsec” VPN Client has always worked well for us. However, last week Apple did the free OS upgrade thing too ( OS X 10.9 “Mavericks” ) and like little kids running after candy (it is Halloween, after all).

IPSec VPN (Virtual Private Network) enables you to securely obtain remote resources by establishing an encrypted tunnel across the Internet.

The RV130 and RV130W work as IPSec VPN servers, and support the Shrew Soft VPN client.

Make sure to download the latest release of the client software.

• Shrew Soft (https://www.shrew.net/download/vpn)

Note: To be able to successfully setup and configure the Shrew Soft VPN client with an IPSec VPN server, you need to first configure the IPSec VPN server. For information about how to do this, refer to the article Configuration of an IPSec VPN Server on RV130 and RV130W.

The objective of this document is to show you how to use the Shrew Soft VPN client to connect with an IPSec VPN Server on the RV130 and RV130W.

Applicable Devices

• RV130W Wireless-N VPN Firewall

• RV130 VPN Firewall

System Requirements

• 32 or 64-bit systems

• Windows 2000, XP, Vista or Windows 7/8

Topology

A top level topology is shown below illustrating the devices involved in a Shrewsoft client to site configuration.

A more detailed flowchart illustrating the role of DNS servers in a small business network environment is shown below.

Software Version

• 1.0.1.3

Setup Shrew Soft VPN Client

IPSec VPN Setup and User Configuration

Step 1. Log in to the web configuration utility and choose VPN > IPSec VPN Server > Setup. The Setup page opens.

Step 2. Verify that the IPSec VPN Server for the RV130 is properly configured. If the IPSec VPN Server is not configured or misconfigured, refer to Configuration of an IPSec VPN Server on RV130 and RV130W and click Save.

Note: The above settings are an example of an RV130/RV130W IPSec VPN Server configuration. The settings are based on the document, Configuration of an IPSec VPN Server on RV130 and RV130W, and will be referred to in subsequent steps.

Step 3. Navigate to VPN > IPSec VPN Server > User. The User page appears.

Step 4. Click Add Row to add user accounts, used to authenticate the VPN clients (Extended Authentication), and enter the desired Username and Password in the fields provided.

Step 5. Click Save to save the settings.

VPN Client Configuration

Step 1. Open Shrew VPN Access Manager and click Add to add a profile.

The VPN Site Configuration window appears.

Step 2. In the Remote Host section under the General tab, enter the public Host Name or IP Address of the network you are trying to connect to.

Note: Ensure that the Port number is set to the default value of 500. For the VPN to work, the tunnel uses UDP port 500 which should be set to allow ISAKMP traffic to be forwarded at the firewall.

Step 3. In the Auto Configuration drop-down list, choose disabled.

The available options are defined as follows:

• Disabled — disables any automatic client configurations.

• IKE Config Pull — Allows setting requests from a computer by the client. With the support of the Pull method by the computer, the request returns a list of settings that are supported by the client.

• IKE Config Push — Gives a computer the opportunity to offer settings to the client through the configuration process. With the support of the Push method by the computer, the request returns a list of settings that are supported by the client.

• DHCP Over IPSec — Gives the client the opportunity to request settings from the computer through DHCP over IPSec.

Step 4. In the Local Host section, choose Use an existing adapter and current address in the Adapter Mode drop-down list.

The available options are defined as follows:

• Use a virtual adapter and assigned address — Allows the client to use a virtual adapter with a specified address as the source for its IPsec communications.

• Use a virtual adapter and random address — Allows the client to use a virtual adapter with a random address as the source for its IPsec communications.

• Use an existing adapter and current address — Allows the client to only use its existing, physical adapter with its current address as the source for its IPsec communications.

Step 5. Click on the Client tab. In the NAT Traversal drop-down list, select the same setting you configured on the RV130/RV130W for NAT Traversal in the article Configuration of an IPSec VPN Server on RV130 and RV130W.

The available Network Address Translation Traversal (NATT) menu options are defined as follows:

• Disable — The NATT protocol extensions will not be used.

• Enable — The NATT protocol extensions will only be used if the VPN Gateway indicates support during negotiations and NAT is detected.

• Force-Draft — The Draft version of the NATT protocol extensions will be used regardless of whether or not the VPN Gateway indicates support during negotiations or NAT is detected.

• Force-RFC — The RFC version of the NATT protocol will be used regardless of whether or not the VPN Gateway indicates support during negotiations or NAT is detected.

• Force-Cisco-UDP — Force UDP encapsulation for VPN clients without NAT.

Step 6. Click on the Name Resolution tab, and check the Enable DNS check box if you want to enable DNS. If specific DNS settings are not required for your site configuration, uncheck the Enable DNS check box.

Step 7. (Optional) If your remote gateway is configured to support the Configuration Exchange, the gateway is able to provide DNS settings automatically. If not, verify that the Obtain Automatically check box is unchecked and manually enter a valid DNS Server Address.

Step 8. (Optional) Click on the Name Resolution tab, check the Enable WINS check box if you want to enable the Windows Internet Name Server (WINS). If your remote gateway is configured to support the Configuration Exchange, the gateway is able to provide WINS settings automatically. If not, verify that the Obtain Automatically check box is unchecked and manually enter a valid WINS Server Address.

Note: By providing WINS configuration information, a client will be able to resolve WINS names using a server located in the remote private network. This is useful when attempting to access remote windows network resources using a Uniform Naming Convention path name. The WINS server would typically belong to a Windows Domain Controller or a Samba Server.

Step 9. Click on the Authentication tab, and select Mutual PSK + XAuth in the Authentication Method drop-down list.

The available options are defined as follows:

• Hybrid RSA + XAuth — The client credential is not needed. The client will authenticate the gateway. The credentials will be in the form of PEM or PKCS12 certificate files or key files type.

• Hybrid GRP + XAuth — The client credential is not needed. The client will authenticate the gateway. The credentials will be in the form of PEM or PKCS12 certificate file and a shared secret string.

Ipsec

• Mutual RSA + XAuth — Client and gateway both need credentials to authenticate. The credentials will be in the form of PEM or PKCS12 certificate files or key type.

• Mutual PSK + XAuth — Client and gateway both need credentials to authenticate. The credentials will be in the form of a shared secret string.

• Mutual RSA — Client and gateway both need credentials to authenticate. The credentials will be in the form of PEM or PKCS12 certificate files or key type.

• Mutual PSK — Client and gateway both need credentials to authenticate. The credentials will be in the form of a shared secret string.

Step 10. In the Authentication section, click on the Credentials sub-tab and enter the same pre-shared key you configured on the IPsec VPN Server Setup page in the Pre Shared Key field.

Step 11. Click on the Phase 1 tab. Configure the following parameters to have the same settings that you configured for the RV130/RV130W in Step 2 of the IPSec VPN Server User Configuration section of this document.

The parameters in Shrew Soft should match the RV130/RV130W configurations in Phase 1 as follows:

• “Exchange Type” should match “Exchange Mode”.

• “DH Exchange” should match “DH Group”.

• “Cipher Algorithm” should match “Encryption Algorithm”.

• “Hash Algorithm” should match “Authentication Algorithm”.

Step 12. (Optional) If your gateway offers a Cisco compatible vendor ID during phase1 negotiations, check the Enable Check Point Compatible Vendor ID check box. If the gateway does not, or you are unsure, leave the check box unchecked.

Step 13. Click on the Phase 2 tab. Configure the following parameters to have the same settings that you configured for the RV130/RV130W in Step 2 of the IPSec VPN Server User Configuration section of this document.

The parameters in Shrew Soft should match the RV130/RV130W configurations in Phase 2 as follows:

• “Transform Algorithm” should match “Encryption Algorithm”.

• “HMAC Algorithm” should match “Authentication Algorithm”.

• PFS Exchange” should match “DH Group” if PFS Key Group is enabled on the RV130/RV130W. Otherwise, select disabled.

• “Key Life Time limit” should match “IPSec SA Lifetime”.

Step 14. Click on the Policy tab and select require in the Policy Generation Level drop-down list. The Policy Generation Level option modifies the level in which IPsec Policies are generated. The different levels provided in the drop-down list map to IPSec SA negotiation behaviors implemented by different vendor implementations.

The available options are defined as follows:

• Auto — The client will automatically determine the appropriate IPSec Policy Level.

• Require — The client will not negotiate a unique Security Association (SA) for each policy. Policies are generated using the local public address as the local policy ID and the Remote Network Resources as the remote policy ID. The phase2 proposal will use the policy IDs during negotiation.

• Unique — The client will negotiate a unique SA for each policy.

• Shared – Policies are generated at the require level. The phase 2 proposal will use the local policy ID as the local ID and Any (0.0.0.0/0) as the remote ID during negotiation.

Step 15. Uncheck the Obtain Topology Automatically or Tunnel All check box. This option modifies the way security policies are configured for the connection. When disabled, Manual configuration must be performed. When enabled, Automatic configuration is performed.

Step 16. Click Add in order to add the Remote Network Resource you want to connect to. Remote network resources include remote desktop access, departmental resources, network drives, and secured electronic mail.

The Topology Entry window appears:

Step 17. In the Address field, enter the subnet ID of the RV130/RV130W. The address should match the IP Address field in Step 2 of the IPSec VPN Server Setup and User Configuration section of this document.

Step 18. In the Netmask field, enter the subnet mask for the RV130/RV130W’s local network. The netmask should match the Subnet Mask field in Step 2 of the IPSec VPN Server User Configuration section of this document.

Step 19. Click Ok to finish adding the Remote Network Resource.

Step 20. Click Save to save your configurations for connecting to the VPN Site.

Step 21. Return to the VPN Access Manager window to select the VPN Site you configured, and click the Connect button.

The VPN Connect window appears.

Step 22. In the Credentials section, enter the username and password of the account you set up in Step 4 of the IPSec VPN Server User Configuration section of this document.

Step 23. Click Connect to VPN into the RV130/RV130W.

The IPSec VPN tunnel is established and the VPN client can access the resource behind the RV130/RV130W LAN.

View a video related to this article...

-->

Applies to

  • Windows 10
  • Windows 10 Mobile

Virtual private networks (VPNs) are point-to-point connections across a private or public network, such as the Internet. A VPN client uses special TCP/IP or UDP-based protocols, called tunneling protocols, to make a virtual call to a virtual port on a VPN server. In a typical VPN deployment, a client initiates a virtual point-to-point connection to a remote access server over the Internet. The remote access server answers the call, authenticates the caller, and transfers data between the VPN client and the organization’s private network.

There are many options for VPN clients. In Windows 10, the built-in plug-in and the Universal Windows Platform (UWP) VPN plug-in platform are built on top of the Windows VPN platform. This guide focuses on the Windows VPN platform clients and the features that can be configured.

Built-in VPN client

  • Tunneling protocols

    • Configure the IPsec/IKE tunnel cryptographic properties using the Cryptography Suite setting in the VPNv2 Configuration Service Provider (CSP).

    • L2TP with pre-shared key (PSK) authentication can be configured using the L2tpPsk setting in the VPNv2 CSP.

    • SSTP is supported for Windows desktop editions only. SSTP cannot be configured using mobile device management (MDM), but it is one of the protocols attempted in the Automatic option.

      Note

      When a VPN plug-in is used, the adapter will be listed as an SSTP adapter, even though the VPN protocol used is the plug-in's protocol.

  • Automatic

    The Automatic option means that the device will try each of the built-in tunneling protocols until one succeeds. It will attempt from most secure to least secure.

    Configure Automatic for the NativeProtocolType setting in the VPNv2 CSP.

Universal Windows Platform VPN plug-in

The Universal Windows Platform (UWP) VPN plug-ins were introduced in Windows 10, although there were originally separate versions available for the Windows 8.1 Mobile and Windows 8.1 PC platforms. Using the UWP platform, third-party VPN providers can create app-containerized plug-ins using WinRT APIs, eliminating the complexity and problems often associated with writing to system-level drivers.

There are a number of Universal Windows Platform VPN applications, such as Pulse Secure, Cisco AnyConnect, F5 Access, Sonicwall Mobile Connect, and Check Point Capsule. If you want to use a UWP VPN plug-in, work with your vendor for any custom settings needed to configure your VPN solution.

Configure connection type

See VPN profile options and VPNv2 CSP for XML configuration.

The following image shows connection options in a VPN Profile configuration policy using Microsoft Intune:

Install Cisco Ipsec Vpn Windows 10

In Intune, you can also include custom XML for third-party plug-in profiles:

How To Set Up L2TP/IPsec VPN On Windows 10

Related topics